| Form | Stereo Integrated Amplifier |
| <Power amplifier part> | |
| Circuit system | |
| Effective output (both channel drive, 40Hz - 20kHz) | 20W+20W (4ohm) 20W+20W (8ohm) |
| THD (40Hz - 20kHz) | 0.8% or less (at the time of an effective output) 0.08% or less (at the time of 1W output 8ohm) |
| Cross modulation distortion | 0.8% or less (at the time of an effective output) 0.08% or less (at the time of 1W output 8ohm) |
| Output bandwidth (IHF, both channel drive) | 5Hz - 70kHz (0.8% of distortion) |
| Output-terminal | Speaker A-B: 4ohm-16ohm Speaker A+B: 8ohm-16ohm Headphone: 4ohms - 16ohms |
| Dumping factor (20Hz - 20kHz) | 25 (8ohm) or more |
| <Preamplifier part> | |
| Input sensitivity/impedance | Phono: 2.5mV / 50kohm Tuner, Aux, Tape PB(Pin/Din):150mV /, 50kohm |
| Phono maximum permissible input (0.1% of THD) | 150mV |
| An Output voltage/impedance | Tape Rec:150mV Tape Rec(Din): 30mV / 80kohm |
| Frequency characteristic | Phono(RIAA deflection): 30Hz-15kHz±0.5dB Tuner, Aux, and Tape PB:20Hz-30kHz+0.5 -1.0 dB |
| Tone control | Bass: +9dB--8dB (100Hz) Treble: ±6dB (10kHz) |
| Loudness contour (Volume-40dB o'clock) | +8dB(100Hz) +5dB(10kHz) |
| S/N (IHF, A network short circuit) | Phono: 70dB or more Tuner, Aux, Tape PB: 90dB or more |
| <Synthesis> | |
| The semiconductor used | Transistor: 19 pieces IC: One piece Diode,others : 13 pieces |
| AC outlet | Power-switch interlock: One line Power-switch un-interlocking.: One line |
| Supply voltage | AC100V, 50Hz/60Hz |
| Power consumption | 50W (rate) 135W (maxima) |
| Dimensions | Width 350x height 125x depth of 282mm |
| Weight | 6.4kg |
| Option: Wood case JA-C60 (\4,500) | |
| Dimensions | Width 404x height 167x depth of 276mm |
| Weight | 2.2kg |
Status : SOLD
Tidak ada komentar:
Posting Komentar